Sanken Hybrid Audio Power Amplifier Data

NOTE!

These amplifier devices have been out of production for >20 years!
 You cannot use them for new projects unless you already have them!
They are no longer available anywhere I know of. 
Flash!: Barry Sloan has one SI-1030 for sale at
 http://www.sbszoo.com/ve6sbs/sale/audio.htm

There are several modern successors so these single-package
audio power amplifier modules.  For example here are some...
 http://home.eunet.cz/rysanek/cheapamps_en.html

This information is provided for sentimental, historical and reference purposes.
Email requesting sources or discussion of this information will not be answered!
I have no affiliation with Sanken nor any Sanken distributor.

This information transcribed from Ancrona data sheet.
No warranty is made for correctness or completeness.

Series SI-1000G

Sanken series SI-1000G amplifiers are self-contained power hybrid amplifiers designed for Hi-Fi,
stereo, musical instruments, public address systems and other audio applications. The amplifiers
have quasi-complimentary class B output. The circuit employs flip-chip transistors with high
reliability and passivated chip power transistors with excellent secondary breakdown strength.
Built-in current limiting is provided for SI-1050G and all devices can be operated from a single
or split power supply.

  SI-1010G SI-1020G SI-1030G SI-1050G
Package Pin-out &
Device Schematic

Package Mechanical
Drawing

Application Circuit
Single-Supply
Application Circuit
Split-Supply
Unipolar Pin-out
Single Supply
 		 1. Ripple filter capacitor (+)
2. Input (+)
3. Input (-)
4. Power supply & output ground
5. Feedback
6. Output
7. Bootstrap capacitor (+)
8. Power supply (+)

 

  1. no connection
 2. Noise suppression capacitor (+)
 3. Input (+)
 4. Input (-)
 5. Power supply & output ground
 6. Feedback
 7. Output
 8. Spare
 9. Power supply (+)
10. no connection
Biploar Pin-Out
(Split Supply)		 1. Ripple filter capacitor (-)
2. Input (+)
3. no connection
4. Power supply (-)
5. Feedback
6. Output
7. Bootstrap capacitor (+)
8. Power supply (+)

 

  1. no connection
 2. Input (-) & ground terminal
 3. Input (+)
 4. Not used
 5. Power supply (-Vcc)
 6. Feedback
 7. Output
 8. Spare
 9. Power supply (+Vcc)
10. no connection

 

Characteristics at 25°C, 1kHz, RL=8 ohms Units SI-1010G SI-1020G SI-1030G SI-1050G
Maximum RMS power W 10 20 30 50
Output Load ohms 8 8 8 8
Supply Voltage V 34 or ±17 46 or ± 23 54 or ± 27 66 or ± 33
Absolute Max Supply Voltage V 45 or ± 22.5 55 or ± 25 60 or ± 30 80 or ± 40
Supply Current (avg.) A 0.50 0.72 0.86 1.1
Protective Fusing (quick blow) A 1 1 1.5 2
Harmonic Distortion at full output (max) % 0.5 0.5 0.5 0.5
Input voltage (typ) V 0.30 0.42 0.52 0.70
Max Input Voltage (p-p) V 10 10 10 10
Voltage Gain Full Feedback (PO=1W) (typ) dB 30 30 30 30
Input Impedance (typ.) ohms 40K 40K 40K 40K
Output Impedance (PO=1W)  (typ) ohms 0.2 0.2 0.2 0.2
Load Current (RMS) (typ) A .89 1.58 2.00 2.50
Load Current (P-P) (typ) A 2.52 4.45 5.66 7.00
Output Voltage (RMS) (typ) V 8.9 12.7 16.0 20.0
S/N ratio (typ), input shorted dB 90 90 90 90
Idling Current (typ) mA 20 20 20 20
Frequency Range (PO=1W) Hz 20-100K 20-100K 20-100K 20-100K
Power Bandwidth (-3dB) Hz 20-20K 20-20K 20-20K 20-20K
Operating Temperature °C -10 ~ +70 -20 ~ +80 -20 ~ +80 -20 ~ +80
Storage Temperature °C -25 ~ +85 -30 ~ +100 -30 ~ +100 -30 ~ +100
Built-in Protection - - - current limiting current limiting

Also available upon request (not posted):

rcrowley.com Sanken Hybrid Audio PA Data

Feedback to:   
NOTE: I cannot provide sources for these devices or discuss application circuits.

© 2000 Richard Crowley
Updated 19-May-2005
Hit Counter